The X-treme Rock Bucket is built out of top quality steel and is
ideal for sifting out large rocks.
Rock buckets work excellent in pastures, lawns or
construction sites. It will catch any rock or piece of debris
that is larger than 2-3/8".
• Optional weld on teeth are available.
• Optional bolt on edge is available.
The X-treme Grapple Bucket is ideal for anyone that owns a skid
steer. It easily picks up logs, rocks, left over building
supplies or any other type of debris. It can handle more
material and is intended for larger machines than our Heavy Duty
Grapple Bucket.
One feature that separates our X-treme Grapple Bucket from
competitors, is that the hydraulic cylinder shaft is enclosed.
Most grapple buckets only have the actual cylinder enclosed and
not the shaft. We protect both! Anyone that has had debris fall
on the cylinder shaft knows what damage is caused.
Our X-treme Grapple Bucket cylinders have a 2" bore and a 10"
stroke, and operate independently to adjust for uneven loads.
The hydraulic lines are routed inside the tubing to prevent
tears. It is also built with top quality steel, oversized points
and bushings, and every pivot point has grease fittings. The X-treme
Grapple Bucket has a 1" x 8" cutting edge. Every unit exceeds the
lifting capacity of the skid steer machine it is used on.
• Optional weld on teeth are available.
• 63" X-treme Grapple Bucket
• 72"
X-treme Grapple Bucket
• 81"
X-treme Grapple Bucket
The Heavy Duty Grapple Bucket is ideal for anyone that owns a
skid steer. It easily picks up logs, rocks, left over building
supplies or any other type of debris.
Our Heavy Duty Grapple Bucket cylinders have a 2" bore and a 10"
stroke, and operate independently to adjust for uneven loads.
The hydraulic lines are routed inside the tubing to prevent
tears. It is also built with top quality steel, oversized points
and bushings, and every pivot point has grease fittings. Every
unit exceeds the lifting capacity of the skid steer machine it
is used on.
• Optional weld on teeth are available.
• Optional bolt on cylinder rod cover kits are available.
Our X-treme
Duty Stump Grapple is made from 1/2" top quality plate, 1"
cutting edge, replaceable teeth and 3/8" hose.
Think of
the uses for this attachment. Not only are you able to dig
out stumps, you are able to carry them away afterwards.
No need
to have another attachment for loading the stump into your
dump truck, or moving the stump to a burn pile. Experience
our extreme stump grapple today!
The X-treme Stump Bucket is an excellent addition to your skid
steer attachments. Easily dig around the stump, then pop it out.
We have even had contractors dig house footings with the stump
bucket. These stump buckets will enable you to be more versatile
in your contracting needs.
The X-treme 4-in-1 Bucket is a very versatile piece for your skid
steer. It is ideal for grappling, dozing, backfilling, loading,
digging and fine grading.
Our X-treme 4-in-1 Bucket cylinders have a 2.5" bore and an 8"
stroke. It is equipped with a 3/4" x 6" cutting edge on the
digging edge and 1/2" x 4" at all other ground engaging points.
It is also built with top quality steel, oversized points and
bushings, and every pivot point has grease fittings. Every unit
exceeds the lifting capacity of the skid steer machine it is
used on.
• Optional weld on teeth are available.
• Optional bolt on edge is available.
alternant names are four in one buckets, 4 in 1 buckets, 4 n
1 buckets, 4-n-1 buckets
