The X-treme Root Grapple is a necessity in the tree industry as
well as for contractors clearing a lot for home site building.
It is also essential for storm damage clean up. It can handle
more material and is more rugged than our Heavy Duty Root
Grapple.
One feature that separates our X-treme Root Grapple from
competitors, is that the hydraulic cylinder shaft is enclosed.
Most root grapples only have the actual cylinder enclosed and
not the shaft. We protect both! Anyone that has had debris fall
on the cylinder shaft knows what damage is caused.
The X-treme Root Grapple is ideal for moving logs, brush, rocks
or just about any type of debris. Each of our hydraulic
cylinders operate independently to adjust for uneven loads. All
of our root grapples are built with 1/2 inch top quality steel
with greasable pins and bushings at all hinge points. Every unit
exceeds the lifting capacity of the skid steer machine it is
used on. Our cylinders have a 2 inch bore with a 10 inch stroke.
All X-treme Root Grapples are backed with a One Year
Factory Warranty.
63" X-treme Root
Grapple
72" X-treme Root Grapple
81"
X-treme Root Grapple
The X-treme Grapple Bucket is ideal for anyone that owns a skid
steer. It easily picks up logs, rocks, left over building
supplies or any other type of debris. It can handle more
material and is intended for larger machines than our Heavy Duty
Grapple Bucket.
One feature that separates our X-treme Grapple Bucket from
competitors, is that the hydraulic cylinder shaft is enclosed.
Most grapple buckets only have the actual cylinder enclosed and
not the shaft. We protect both! Anyone that has had debris fall
on the cylinder shaft knows what damage is caused.
Our X-treme Grapple Bucket cylinders have a 2" bore and a 10"
stroke, and operate independently to adjust for uneven loads.
The hydraulic lines are routed inside the tubing to prevent
tears. It is also built with top quality steel, oversized points
and bushings, and every pivot point has grease fittings. The X-treme
Grapple Bucket has a 1" x 8" cutting edge. Every unit exceeds the
lifting capacity of the skid steer machine it is used on.
• Optional weld on teeth are available.
63" X-treme Grapple Bucket
72"
X-treme Grapple Bucket
81"
X-treme Grapple Bucket
Our X-treme Rock Grapple is great for sifting through the dirt
to get out the rocks. With the tines set at 2 1/2" apart, you
pick up most everything but the dirt.
With the use of the grapples, you can pick up large rocks,
logs, brush or just about anything else. We use twin 2" bore by
10" stroke cylinders rated at 3000 psi on all of our grapples.
63"
X-treme
Rock
Grapple
72"
X-treme
Rock
Grapple
81"
X-treme
Rock
Grapple
Our X-treme Grapple Rake is ideal for for raking up debris, then
using the grapples to load it into a dump truck. The shape of
the grapple rake makes it easy to roll debris into tight piles
if you are planning to burn.
A single grapple (pictured) or two independent grapples are
available. We use twin 2" bore by 10" stroke cylinders, rated at
3000 psi for the toughest jobs.
63" X-treme
Grapple
Rake
72" X-treme
Grapple
Rake
84" X-treme
Grapple
Rake
96" X-treme
Grapple
Rake
The Heavy Duty Root Grapple is a necessity in the tree industry
as well as for contractors clearing a lot for home site
building. It is also essential for storm damage clean up.
One feature that separates our Heavy Duty Root Grapple from
competitors, is that we offer optional bolt on cylinder rod
covers to protect the hydraulic cylinder shaft. Most root
grapples only have the actual cylinder enclosed and not the
shaft. We have the option to protect both. Anyone that has had
debris fall on the cylinder shaft knows what damage is caused.
The Heavy Duty Root Grapple is ideal for moving logs, brush,
rocks or just about any type of debris. Each of our hydraulic
cylinders have a 2 inch bore with a 10 inch stroke and operate
independently to adjust for uneven loads. All of our root
grapples are built with 1/2 inch top quality steel with
greasable pins and bushings at all hinge points. Every unit
exceeds the lifting capacity of the skid steer machine it is
used on.
• Optional spacer tines are available.
• Optional bolt on cylinder rod cover kits are available.
The Heavy Duty Grapple Bucket is ideal for anyone that owns a
skid steer. It easily picks up logs, rocks, left over building
supplies or any other type of debris.
Our Heavy Duty Grapple Bucket cylinders have a 2" bore and a 10"
stroke, and operate independently to adjust for uneven loads.
The hydraulic lines are routed inside the tubing to prevent
tears. It is also built with top quality steel, oversized points
and bushings, and every pivot point has grease fittings. Every
unit exceeds the lifting capacity of the skid steer machine it
is used on.
• Optional weld on teeth are available.
• Optional bolt on cylinder rod cover kits are available.
The X-treme 4-in-1 Bucket is a very versatile piece for your skid
steer. It is ideal for grappling, dozing, backfilling, loading,
digging and fine grading.
Our X-treme 4-in-1 Bucket cylinders have a 2.5" bore and an 8"
stroke. It is equipped with a 3/4" x 6" cutting edge on the
digging edge and 1/2" x 4" at all other ground engaging points.
It is also built with top quality steel, oversized points and
bushings, and every pivot point has grease fittings. Every unit
exceeds the lifting capacity of the skid steer machine it is
used on.
• Optional weld on teeth are available.
• Optional bolt on edge is available.
alternant names are four in one buckets, 4 in 1 buckets, 4 n
1 buckets, 4-n-1 buckets
Our X-treme
Duty Stump Grapple is made from 1/2" top quality plate, 1"
cutting edge, replaceable teeth and 3/8" hose.
Think of
the uses for this attachment. Not only are you able to dig
out stumps, you are able to carry them away afterwards.
No need
to have another attachment for loading the stump into your
dump truck, or moving the stump to a burn pile. Experience
our extreme stump grapple today!
X-treme
Tine
Grapples
Our X-treme
Tine
Grapple is
an
excellent
piece of
equipment
to have on
the farm.
Whether
moving
bales of
hay or
cleaning
up after
storm
damage,
you will
find many
uses for
the skid
steer tine
grapple.
63"
X-treme
Tine
Grapple
66"
X-treme
Tine
Grapple
72"
X-treme
Tine
Grapple
78"
X-treme
Tine
Grapple
81"
X-treme
Tine
Grapple
84"
X-treme
Tine
Grapple
Please call us for a shipping quote (336) 859-2002 .
Please leave a message if there is no answer, and we will return
your call as soon as possible. CID
Construction Implements Depot LLC
PO box 397 1248 North Main Street
DENTON, NC 27239
Email us at
info@cidattachments.com
