Clicky

skid steer attachments, tractor loader attachments, and specialty skid steer attachments made by CID Attachments image
 336-859-2002                          Request a CID product catalog  

 
Manufacturing high quality, dependable skid steer attachments, tractor loader attachments as well as specialty skid steer attachments.
 

 
Standard Duty Brush Cutter


 
 
 
 

Open Front (picture shown with optional mesh grill)
 
 
 Our Standard Duty Brush Cutter comes with a 60" or 72" mowing deck. It features a 30HP gear box and stump jumper. A flow of 11-20 gpm is required. The one year warranty does not cover the blades or hoses. (Click to view the full warranty).
  

Standard Low Flow Brush Cutter 11 GPM - 20 GPM

  • 3’’ Cutting Capacity
  • 3/16’’ Deck with 3/8" A36 reinforced sides
  • 30HP Right Angle gear box
  • 2 blades with stump jumper
  • High torque Motor with 3000 PSI Relief Valve
  • Does not require a case drain
 
  Standard Low Flow Brush Cutter Specs 
 
 
 Open Front
 
     
  
Heavy Duty Brush Cutter


 
   
 

Our Heavy Duty Brush Cutter comes with a 60" or 72" mowing deck. It features a RC100 gear box. A flow of 14-20 gpm is required. The one year warranty does not cover the blades or hoses. (Click to view the full warranty). 

Open Front Heavy Duty Brush Cutter

  • 4’’ Cutting Capacity
  • 3/16’’ Deck with 3/8" A36 reinforced sides
  • RC100 gear box
  • Parker motor
  • 2 blades with 5/8" AR400
  • Does not require a case drain

 

   
   Heavy Duty Open Front Brush Cutter Specs 
  
 
     
  
X-treme Brush Cutter


 
     
 Our X-treme Brush Cutter is an ideal attachment for tough clearing applications. The cutter comes in a 60” or 72” cutting width. It is equipped with bidirectional blades, powered by a high torque piston motor and bearing housing. We offer flows of 17-30 gpm and 30-48 gpm. The one year warranty does not cover the blades or hoses. (Click to view the full warranty ). 

 

 
 


X-treme Brush Cutter 30 GPM- 48 GPM

  • 6’’ cutting capacity
  • 1/4’’ deck with sides reinforced with 3/8’’ AR400
  • Piston Motor direct Drive
  • 3 bidirectional blades made with 5/8” AR400
  • Requires a case drain
  • Available in 60” or 72” cutting width
  • 1/2" Double round disc blade holder
  X-treme Brush Cutter Specs
 
  

 
  

X-treme Brush Cutter 17 GPM- 30 GPM

  • 6’’ cutting capacity
  • 3/16’’ deck with sides reinforced with 3/8’’ AR400
  • 3 bidirectional blades made with 5/8” AR400
  • Does not require a case drain
  • Piston motor direct drive
  • 3/8" Double clover leaf shaped blade holder
   
     
336-859-2002     •     Fax: 336-859-0800     •     1248 N. Main St.     •     P.O. Box 397     •     Denton, NC 27239
  
Copyright© 2012 - All Rights Reserved

Website Design by: JaBuie IncWeb Hosting & Search Engine Optimization by: Trinity Solutions Inc .